Modular Industrial PLC Architecture
Empowering Smart Manufacturing & IIoT

Compliant with JJF 2095-2024 standard for pressure data loggers. Provides a precision temperature environment with ±0.1°C accuracy, 0~150°C temperature control range, and 0~1000 kPa pressure environment. Ideal for calibrating pressure sensors used in biological autoclaves and steam sterilizers.

TB-02 Temperature Calibration Air Bath for thermal calibration with accuracy of ±0.1°C and range of 0~150°C. Features a large-capacity air bath chamber, ideal for metrology verification and batch calibration of wireless thermometers and grain depot temperature sensors.

Delivers temperature control accuracy within ±0.1°C (stability ±0.01°C) with a temperature control range of 0~150°C (span -30~150°C), designed for high-precision temperature calibration and laboratory viscosity measurement.

Portable dry block heating calibrator with 35~300°C temperature control range (span 30~300°C), featuring rapid stabilization, high mobility, and straightforward operation.

Ultra-low temperature dry block calibrator with -100~0°C temperature control range and accuracy up to ±0.1°C (stability ±0.05°C), designed for precision calibration of cryogenic temperature sensors.

High-performance industrial wide-range dry block furnace with 35~750°C temperature range, rapid heating and cooling cycles, and thermal stability of ±0.05°C, suitable for precision calibration of thermocouples and industrial RTDs.

Low-temperature dry block calibrator with -40°C~150°C temperature control range, covering common thermal spans from -40°C deep freezing up to 150°C high-temperature testing.

Integrated automated calibration system for biological autoclaves and sterilizers. Delivers precise temperature control (0~150°C), pressure calibration (0~1000 kPa), and precision clock verification with automated compliance report generation.

High-precision bipolar analog controller CPU featuring 3x ±10V bipolar voltage inputs, 2x ±10V analog outputs, 2 serial ports, and multi-bus interfaces for rapid voltage acquisition and closed-loop control.

Hybrid automation controller with 3x 4-20mA inputs, 1x analog output, 2x local transistor digital outputs (DO), and 2 serial ports, ideally suited for equipment requiring both analog and switching outputs like FLR1000.

Industrial digital I/O module usable as a PLC backplane expansion unit or independently as a standalone Remote I/O. Supports optional CANopen and Modbus protocols, providing 16 optocoupler-isolated digital inputs and 16 transistor digital outputs.

European-standard sourcing PNP digital module usable as a PLC backplane expansion or standalone Remote I/O. Supports optional CANopen and Modbus protocols, featuring 16DI + 16DO (PNP driver) with integrated 24V undervoltage and short-circuit protection.

High-reliability latching relay module usable as a PLC backplane expansion or standalone Remote I/O. Supports optional CANopen and Modbus protocols. Features 4 independent dual-position latching relays (COM/NO) with 10ms pulse flip excitation, retaining state during power loss with zero steady-state power consumption.

High-reliability PT1000 temperature acquisition module usable as a PLC backplane expansion or standalone Remote I/O. Supports optional CANopen and Modbus protocols. Provides 4 independent PT1000 channels with anti-interference digital filtering for stable industrial temperature measurement.

带AI智能语音交互的HMI屏，带电容触摸，支持CAN、RS-485接口，支持WiFi、BLE，可用于各类工业自动化控制系统以及智能设备、智能家居场景

High-reliability PT100 temperature acquisition module usable as a PLC backplane expansion or standalone Remote I/O. Supports optional CANopen and Modbus protocols. Provides 4 independent PT100 3-wire/4-wire channels with precise linearization compensation and high industrial noise immunity.

High-precision industrial temperature sensor with fast response and good stability.

Wireless temperature sensor suitable for monitoring environments where wiring is difficult.

High-temperature resistant sensor designed for harsh industrial environments.

Miniaturized temperature sensor easy to integrate into various equipment.

Smart control plug supports remote switching and power monitoring.

Detects sound level in the environment.

High-performance audio processing module supporting various formats.

Active buzzer module for alarm indications.

Dual-channel light intensity detection for ambient light monitoring.

6-axis Inertial Measurement Unit with accelerometer and gyroscope.

9-axis Inertial Measurement Unit with accelerometer, gyroscope, and magnetometer.

Three-channel button input module usable for custom functions.

RS-485 modbus DTU data acquisition module, supporting MQTT upload and wireless communication via 5G, WiFi, and BLE.

5G Communication Module, supporting UART, RS485, CAN interfaces, suitable for industrial IoT.

High sensitivity sound detection module for environmental noise monitoring.

Integrated audio processing module, supports voice playback and acquisition.

Dual-mode satellite positioning, providing high-precision location information and timing.

Active buzzer for alarm indication and status feedback.

Integrated dual light detection for precise ambient light intensity sensing.

Universal extension interface module providing additional IO and connectivity.